RollSeal RS-500 Installationshandbuch PDF herunterladen (Seite 19)

Part No 4801-5154 Rev 01-2015 RS-500/600 Series Doors Page 19

13.4 Attachment Points of Door

When sizing the clear opening for attachment of the door, pay close attention to the following guidelines. Door

flanges have pre-drilled holes that serve as mounting points of door.

Flange widths are shown in Diagram 13A.

1. Make sure that door assembly is plumb & square.

2. The top unit has a top flange and a bottom flange. Make sure these flanges overlap framing.

3. The vertical members have inner flanges and outer flanges. The outer flanges have pre-drilled holes that

serve as attachment points. Make sure the outer flanges overlap framing.

4. When door is raised in front of clear opening (Section 13.8, Page 22), Diagram flanges must be flush

against framing for attachment of screws.

Diagram 13A

Bottom View

Framing Members

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 62 63

Keine Kommentare

RollSeal RS-500 Installationshandbuch Seite 19